Showing 1–10 of 49 results

Reach-In Cooler – EW Series

Compact EW Series wall units are a single coil construction for either wall or mullion mounting. The units are supplied up flow, but their exclusive reversible air flow design allows them to be field modified for down flow.

The EW Series reach-in cooler casings are heavy-gauge textured aluminum grill, polypropylene fans and stainless steel or plated hardware for lightweight and corrosion-free assembly.

Life-lubricated, impedance-protected, heavy-duty fan motors are provided for long life and dependable service.

ZeroLeak Certified

Unit Coolers
Wall Units Single Coil

Reach-In Cooler – EC Series

Compact EC Series units are a single coil construction for either ceiling or back wall mounting. Air distribution is toward the back wall of the reach-in cooler. The fan draws air via the fan guard, and discharges it onto the evaporator coil and out the rear of the unit.

The EC Series reach-in cooler casings are heavy-gauge textured aluminum with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for lightweight and corrosion-free assembly.

Life-lubricated, impedance-protected, heavy-duty fan motors are provided for long life and dependable service.

ZeroLeak Certified

Unit Coolers
Wall Units Single Coil

Reach-In Cooler – ES Series

ES Series units are a single coil construction for air distribution on the rear of the reach-in cooler or freezer. The fans draw air via the fan guards and then discharge it onto the evaporator coil and out the back of the unit.

The ES Series reach-in cooler casings are heavy-gauge textured aluminum with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for lightweight and corrosion-free assembly.

Life-lubricated, impedance-protected, heavy-duty fan motors are provided for long life and dependable service.

ZeroLeak Certified

Unit Coolers
Wall Units Single Coil

Reach-In Cooler – ED Series

ED Series units are of dual coil construction for equal air distribution on both sides of a reach-in cooler. The fans draw air via the fan guards and then discharge it from two evaporator coils located on each end of the unit.

The ED Series reach-in cooler casings are heavy-gauge textured aluminum with polycarbonate fan guards, polypropylene fans and stainless steel or plated hardware for lightweight and corrosion-free assembly.

Life-lubricated, impedance-protected, heavy-duty fan motors are provided for long life and dependable service.

ZeroLeak Certified

Unit Coolers
Wall Units Single Coil

Reach-In Cooler – Euroline USA

USA models are of a single coil construction for an air distribution directed towards the back of the cooler. Fans draw air through the fan guards and discharge it through the evaporator coil on the rear end of the unit.

ZeroLeak Certified

Unit Coolers
Wall Units Single Coil

Reach-In Cooler – Euroline UDA

UDA models are of a dual coil construction for an equal air distribution on both sides of the unit. The fans draw air upward through the fan guard and discharge it through each evaporator coil.

ZeroLeak Certified

Unit Coolers
Wall Units Single Coil

Walk-In – Industrial EH Series

High velocity EH Series units are of single coil construction air distribution towards the center of the cooler or freezer. The fans draw in air from the evaporator coil and discharge it through the fan guards on the front of the unit.

The EH Series walk-in cooler casings are heavy-gauge textured aluminum with PVC-coated wire fan guards, aluminum fans and plated hardware for heavy-duty and corrosion-free assembly.

Life-lubricated, thermally protected, heavy-duty fan motors are provided for long life and dependable service.

Available in SmartPower Version

Availaible in CityQuiet Version

ZeroLeak Certified

Unit Coolers

Walk-In – Kompact Industrial EK Series

Walk in Coolers

High velocity EK series are a single coil construction for an air distribution directed towards the center of the room. Fans draw air through the evaporator coil and discharge through the fan guards on the front of the unit.

SmartPower version available

ZeroLeak Certified

Unit Coolers

Walk-In – Industrial EM Series

High velocity EM Series units are of single coil construction air distribution towards the center of the cooler or freezer. The fans draw in air from the evaporator coil and discharge it through the fan guards on the front of the unit.

The EM Series walk-in cooler casings are heavy-gauge textured aluminum with PVC-coated wire fan guards, aluminum fans and plated hardware for lightweight and corrosion-free assembly.

Life-lubricated, thermally protected, heavy-duty fan motors are provided for long life and dependable service.

SmartPower version available

CityQuiet version available

ZeroLeak Certified

Unit Coolers

Walk-In – Commercial LA Series

Applications:

Coolers above +34°F

Low Air, blow through, low velocity units

Capacity from 6000 to 46000 Btu/hr/10°F.T.D

Standard Aluminium

Available in steel with white paint

Available in stainless steel 316

SmartPower version available

ZeroLeak Certified

Unit Coolers