Showing all 6 results

Walk-In – Kompact Industrial EK Series

Walk in Coolers

High velocity EK series are a single coil construction for an air distribution directed towards the center of the room. Fans draw air through the evaporator coil and discharge through the fan guards on the front of the unit.

SmartPower version available

ZeroLeak Certified

Default

Walk-In – Industrial EI Series

Walk in Coolers

Extra-high velocity EI Series units are of single coil construction air distribution towards the center of the cooler or freezer. The fans draw in air from the evaporator coil and discharge it through the fan guards on the front of the unit.

The EI Series walk-in cooler casings are heavy-gauge galvanized steel with PVC-coated wire fan guards, aluminum fans and plated hardware for heavy-duty and corrosion-free assembly.

Life-lubricated, thermally protected, heavy-duty fan motors are provided for long life and dependable service.

Availaible in SmartPower version

Availaible in CityQuiet version

ZeroLeak Certified

Default

ONS Copeland Semi-Hermetic Compressor

  • Outdoor Vertical Air Flow
  • Single Compressor from 25 to 50 HP
  • Dual Compressor from 50 to 100 HP
  • Low, medium, extended medium & high temperature
  • SmartPower version available
  • CityQuiet Version available
  • ZeroLeak Certified
Default

Opti-Mist Plus

How does it work?

The Opti-Mist Plus system uses a natural air cooling process by evaporating a small amount of water to pre-cool air entering a heat exchanger. A system of headers with atomizing nozzles generates a fog of ultra-fine water droplets in the entering air of the unit. A modulating control (50 to 100%) will adjust the air cooling to the job requirement reducing the amount of water used.

Benefits

  • Pre-cooling the entering air is like reducing the ambient condition at the unit.
  • The Opti-Mist Plus system reduces the size of cooling units while still meeting the cooling requirements of the application.
  • The Opti-Mist Plus system saves energy by reducing the condensing temperature and the fluid temperature. The fluid can be cooled at a temperature close to the ambient temperature.
  • Allows CO2 systems to operate in sub-critical condition for longer hours or more efficiently in a warmer climate.
Default

Our CO2 (R744) Product Range

Evaporators type for refrigerated  cabinet direct expansion mode  and recirculation.

Type of  evaporators for cold chamber direct expansion mode and recirculation.

Gas coolers for facilities operating in transcritical system for design pressure of 1740psi.

Heat recovery ensuring an efficient performance due to high temperatures of CO2.

Design pressure: up to 1740psi (120bar).

CityQuiet version available

SmartPower version available

ZeroLeak Certified

Default